| NO | Change phase | Changes | Date | Version |
| 1 | / | New release | 2024-3-8 | A0 |
| Parameter definition | Parameters/Description |
| Main control chip | Microphone: Jerry 7066D |
| Bluetooth version | Microphone: V5.3 |
| Bluetooth power | Microphone: 9db |
| Bluetooth Frequency | Microphone: 2402MHz-2480MHz |
| Sound Channel system | No function |
| Charging interface | TYPE C |
| Adapter specifications | DC5V 1A |
| Battery | Microphone: 3.7V 500mAh |
| Horn | No function |
| Frequency response range | No function |
| Sensitivity | No function |
| Distortion | No function |
| Output rated power | No function |
| Music playback time Hotel California |
Microphone approx. 30H(shout mic) |
| Standby time (Bluetooth connected without music) |
Microphone approx. :30H (standby) |
| Charging time | Microphone :500 1.5± 0.5 H |
| Bluetooth Connection distance | Microphone: 10m (no obstruction) |
| Static power consumption after shutdown | Microphone: 2uA |
| Power consumption with lights off | Microphone: 17mA |
| Power consumption with lights on | Microphone: 17mA |
| Product certification | Upon request |
Battery model: 14500
Battery capacity/Voltage 500mAh/3.7V
Battery specification:
Cycle life: 150 times
Battery Photo:
Horn driving mode: moving coil
Horn diameter: /
Finished impedance: /
Product sensitivity (input1V VOL=MAX 1M) :/
Finished channel balance (AT 1KHZ 1W) :/
Maximum power: /
Finished distortion (1KHZ 0DB) : ≤1%
Frequency range: /
Finished test equipment: · Sunlight electroacoustic test system · Fine Sound LMS Electroacoustic test system ·SOUNDCHECK Electroacoustic test system
| 1 | Bluetooth name | Use the Bluetooth tester and microphone speaker to automatically search for pairing connections and see if the name displayed on the Bluetooth tester is normal | Bluetooth Name: No function |
| 2 | Power on \ Off | Power button Power on, off, indicator light, prompt tone is normal | Normal function |
| 3 | Bluetooth | Play music after the Bluetooth tester is paired with the speaker successfully, and test the key functions: up and down music, volume increase and decrease, play/pause, etc., pay attention to whether the sound has current sound, small sound, noise, broken sound, etc. | No function |
| 4 | TF card | Use TF card to insert microphone speaker and play music, while testing key functions: up, next, play/pause, volume increase and decrease, pay attention to whether the sound has current sound, small sound, noise, broken sound, etc. | No function |
| 5 | USB flash drive | Use the U disk to insert the microphone speaker and play music, while testing the key function: up, next, play/pause, volume increase and decrease, pay attention to whether the sound has current sound, small sound, noise, broken sound, etc. | No function |
| 6 | AUX | Insert one end of the 3.5 to 3.5 audio cable into the speaker and one end into the mobile phone or computer and open the mobile phone or computer music APP to play music, and test the key function: up, next, play/pause, volume increase and decrease, pay attention to whether the sound has current sound, small sound, noise, broken sound, etc. | No function |
| 7 | Radio | Insert the charging cable to connect the speaker as an FM antenna, and near the window or leave the computer or charger and other equipment with large interference, press the play key to automatically search the radio and automatically save the radio, press the +/- key to retrieve the radio, and pay attention to whether there is current sound, small sound, noise, broken sound, etc. | No function |
| 8 | Call test | Enter the phone mode after pairing and connecting the Bluetooth tester with the speaker, align the microphone hole of the speaker, pay attention to monitor the output sound of the tester for noise, small sound, broken sound, etc. (Monitor the headset connected to the Bluetooth tester sound output) | No function |
| 9 | Key function | Power key: Long press 3S on/off, short press mode switch: short press mode adjustment switch: long press 8 seconds reset (forced shutdown), plus key: click Add microphone, accompaniment volume, long press continue to add microphone, accompaniment volume, minus key: click reduce microphone, accompaniment volume, long press continue to reduce microphone, accompaniment volume, mode key: short press magic tone switch: KTV mode - Shout Mai mode - Male to female - female to male - monster sound - doll sound (boot default KTV mode), long press to eliminate human voice on/off | Keys function properly |
| 10 | Indicator light | Indicator status: The startup blue light flashes quickly, and the connected speaker blue light is steady on. Charging light effect: the red light is on when charging, and the red light is off when it is full. |
Prompt light and corresponding status normal |
| 11 | Battery display | After connecting the speaker with an iPhone, pay attention to whether the power symbol of the speaker is displayed in the upper right corner of the phone, such as: |
No such function |
| 12 | One to two (TWS) | Any two speakers Bluetooth connection combined into a stereo speaker, and then connected Bluetooth test simultaneously play music, test key function host control host, secondary control secondary, sound delay | No function |
| 13 | Call distance | The speaker is successfully connected to the iPhone in the room to make and receive calls respectively, and the speaker is ≥10 meters facing the phone, and the back is ≥8 meters facing the phone | No function |
| 14 | Connection stability | Successfully connect the speaker with an Apple phone and play music in the room. In the straight line connection distance without obstacles, the connection distance is ≥10 meters, pay attention to listen to whether there is a pause, jamming and other phenomena | Connection distance ≥10 meters, music playback is normal |
| 15 | Charging test | Insert MICRO USB/Type-C 5V 500mA charging cable to charge the speaker | Normal function |
| 16 | Full charge time | Charge microphone speaker with 5V 1A charger | 1.5 & # 177; 0.5 H |
| 17 | Mono test | Test the music through Bluetooth or TF card, pay attention to the sound output: male voice, female voice | No function |
| 18 | Recording Test | Bluetooth recording test: Apple phone test/Android phone test, Sing bar/Cool dog/National K song /QQ Music Cable recording test: Apple phone test/Android phone test, Sing bar/Cool dog/National K song /QQ Music (to be tested) |
Normal function |
| 19 | Auto shutdown | Suspend playback after 10 minutes of disconnection between the speaker and the mobile phone. Watch whether the speaker will automatically shut down after 10 minutes. | 10 minutes sleep |
| 20 | Shutdown sleep current | DC3.7V< 50uA | 2uA |
| 21 | Charging voltage \ current | DC5V,< 500 | < 500 |
| 22 | Low Battery test | Power on connect Bluetooth /TF card, play songs to test whether there is a prompt/shutdown when the machine power is low. | No function |
| 1 | Free drop | Drop the bare machine product from a height of 80Cm to the cement floor, six sides/once each, check whether each side is cracked and loose, and check whether the indicator light and function are normal | / |
| 2 | Vibration test (bare metal) | According to the characteristics of our vibration tester, set the frequency of 200Hz, vibration 4H, after the experiment to observe whether the product cracking, loosening, function test, indicator light, electrical function is normal | / |
| 3 | USB Connector plug test | Simulate the plug and unplug action during normal use, power and charger products are plugged and unplugged 5000 times, Bluetooth products are plugged and unplugged 3000 times, the plug and unplug speed is 10 ~ 20 times/min, and confirm whether the port can be plugged and unplugged normally after the test (the socket is allowed to have mild appearance damage after the test), and whether there is poor contact in the function test | / |
| 4 | High and low temperature cycle | Place the Bluetooth speaker at a temperature of 20℃± Perform the following steps in a temperature control box at 5 ° C a) Place the sample at a temperature of 65℃± Keep it at 2℃ for 4 hours; b) Reduce the temperature of the test chamber to -20℃± 2 ° C and kept for 4 hours; c) Temperature conversion time is not more than 30 minutes; Bluetooth audio should not leak, not deflated, no fire and no explosion, no rupture, indicator light and various electrical functions are normal |
/ |
| 5 | Salt spray test (bare plate) | For hardware, salt spray test should be carried out before the incoming material is put on line. 5% NaCl solution,PH value between 6.5-7.3, at 35℃ through the salt spray testing machine 1.4± 0.2Kg/㎝2 air pressure automatic spray for 12 hours. No corrosion occurs | / |
| 6 | Key Trust test | Simulate the action of pressing the key during normal use, press and touch the instrument platform for 3000 times repeatedly, and confirm whether the key can be used normally after the test | / |
| 7 | Communication Quality Test | Indoor connection Apple, Huawei, respectively for receiving/making calls, facing the phone 10 meters; 8 meters away from the phone; 360-degree dead Angle test within 5 meters of outdoor roof no abnormality. | / |
| 8 | Audio Output Quality testing | Apple, Huawei and other brands of mobile phones as the test reference object, respectively play music to confirm whether the sound effect is normal | / |
| 9 | Aging test | First fully charge the Bluetooth speaker, play the music at the maximum volume, and then cycle for 3 times while playing for 12 hours, and then test its various electrical functions to see whether it is normal | OK |
